Видео

Is the brass screw Straight blade or Philips ? Good video I getting ready to do my 686 barrel that Smith& Wesson says is "in the spec" It looks like the folks at Smith carve the end of the barrel with a Dremel tool.

Man you did a really nice job, I recently got a 1448 Triton on a trailer for under $ 1000, I'm planning to deck it out and ad the same items you have on your rig, Your video has given me a lot of good idea's , so thank you and good luck on the water sir !!!

Definitely should’ve seasoned the grates first

All the Smart water bottle I find only have the std cap

just got a set very informative video - yeah the bags didn't light my fire either

What temperature do you put the oven

Great video. Watched others and they never removed the cylinder for a thorough cleaning. Also liked the tip about firing the 357 first before shooting 38 specials. Well done.

A few tiny drops of oil or clp in actionable parts would suffice, work the action a bit and let it do it's job. Any use thereafter will help keep the parts moving and well lubed without gunking up the works.

You Americans would sh*t if you saw the prices of these puppies in Australia.

As easy as the first one came out I'd think you'd have been better off marking the hole to drill and drilling away from the gun itself.

Good looking crate box💥🙌🏻

All those springs! You make this look about 6,000 times easier than it actually is.

Old eyes and "Crackhead shakes"! Don't believe a single word here.

I just found my great grandparents cast iron skillets. My grandma 1914 -1987 and my grandpa 1918-1997. I don't know when they got the skillets, but I'm so excited to have them. Thank you for your video.❤

I don’t see this bowl online could you confirm the size and does in not have a handle? Thank you

Sweet!

I see you have an original 6 round 686. I have the exact same gun and it is way smoother than the newer 686+. It is a gun you keep forever.

I read it in 78 and was one of the first to join REA. I am Texan living in Thailand

Viola?

Same CZ mag as the 452

Some other designs are - Seecamp LWS .32 acp - NAA Guardian .32 acp - Keltec P-32 .32 acp - Bauer .25 acp

WHY DO ALL THESE INSTRUCTIONS MORONS SHOW THE BEFORE AND AFTER BUT NOTHING SHOWN OF THE IN BETWEEN????? I want to see you install it tard baby!!

the classes are determined by how much you spend or the MSRP, because that can be a big difference

Snug your bow down

This is misleading. Not the same as the still.😮

i just bought one and the ad said up to 1000 223, not 1500. havent got it yet. maybe they adjusted it since

lmao your able to do more research about this then ameriglow, dawson, and dan wesson! wild

I'm a sucker for a nice piece of walnut. Beautiful!

Thank you for your detailed journey. After watching this I’m gonna skip the DWX compact and stick with my shadow 2 compact

red paint on the hammer is GENIUS!

Anybody still watching these magazine take apart, get small zip tie, go around the mag slip it below the nut and screw, , loosen the screw enough push it so the nut release from the mag, then take it out, slip zip tie off the top, put back together, put zip tie back on, mark the nut put the screw in so starts on the nut, then use a small box end 11mm wrench, craftsman, then just turn it 8 flats or 1 and 1/4 turns, push it in the mag, tighten the screw, all done, easy easy, slip the zip tie off the top,

Keep an eye on that cable steering- if it goes bad I would replace it with hydraulic. Nice boat!!

When you mentioned those prices I knew I was watching a pre-pandemic video.

Nice

Nice weapon sir. I run a Taccom 5.25 in my custom build love it GREAT Company

So, what is the trigger weight pull before and after installed the spring kit ? if not mention then it is the same, so why we installed the new spring kit for ? just to void the warranty ?

Scope sits super high

My bass boat is a 1991 Nitro TF160 sold new in 1992. The motor and trailer were new in 1992. Up to 2019 I put one regulator rectifier on the 60hp Evinrude that was it. Since 2019 I have updated the motor to a 2012 75hp Evinrude. I have also put new tires and lights shackles bushings and bearings on the trailer. I also had to cut out some rust and piece in new metal. I need new seats and carpet. Replaced the steering last year. I also replaced the trolling motor electronics and batteries a few times. Last year I completely rebuilt the 2012 Evinrude. It runs like new. Fishes like the dsy I bought it. Sure it needs cosmetic work and I plan on that. Much better than trying to buy a massively overpriced new one. By the way I actually bought mine used in 1996 for $5000.

Beautiful Ranger. I have a 1989 396v and my live wells do the same thing. Not sure where the water comes from. Again, congrats on your new Ranger. Great find. Enjoy!!

I have both and it’s the same thing to me….they both have their pros and cons just a matter of what fits your budget.

super helpful. thank you!!

I have a 362v as well, does anyone know where I can get a deck extension?

Thanks for the in-depth analysis of the DWX compact. I’m not a match shooter, I’m just holding off until the optic cut models come out. (Subd)

👍👍

Worth watching just to find out how to get lead off the front of the cylinder. The 686 is the first stainless handgun I've owned and I really struggled with those deposits first time I cleaned it.

Why not use the ultrasonic cleaner?

Very well done video. Thanks.

Which cheek rest is that on the Tikka?

After i pickup range brass it is sifted, visually checked, rough washed, inspected again, and chamber checked in a 10x10 aluminum shockbottle tray. If any brass does not seat flush with some light finger tapping, it goes in the brass scrap metal recycler at the range. I know for a fact that major power factor 9mm brass will not chamber check after fired so this gives me peace of mind and i’ve had no issues (sound of me knocking on wood). After all this process i them tumble and clean to a shine all brass, dry, and visually check once again to look for other issues like stretch marks, cracks, creases, dents, worn head stamping, small flash holes (normas), etc. i shoot uspsa, icore, steel challenge, etc many times a month and have had success with nearly 50k rounds no issues. I do use a primer pocket swager/sensor on my press that sizes and alerts me to crimped cases but usually i identify them, as well as glued primers, after the first rough wash. Be safe!

Hi again… I don’t see a link to the video you mention. Am I missing something. When I go in to do the TKC mods; besides cleaning; I plan to use a low speed battery dremel and some buffing attachments & Flitz and polish every thing up. Again… Hope you’re still out there; read this and send feedback. Thanks again… Gene